Machinery series: Designing and specifying safety related control systems – Buxton, 14 July 2016

Book Course

HSL is to run a 1 day course on Machinery Series – Designing Specifying Safety Related Control Systems.

14 July 2016

Introduction

Control systems for machinery, whether electrical, pneumatic,
hydraulic or combinations there-of, are often required to perform
safety-related functions. There are regulatory requirements for
these control systems and established approaches for dealing with
their design, which are laid out in European Standards. This course
will help delegates understand how to specify and design safety
related control circuits which comply with the requirements of both
the Supply of Machinery (Safety) Regulations 2008 (Machinery
Directive 2006/42/EC) and the Provision and Use of Work Equipment
Regulations. It explains how these, and other regulations and
standards are applied to real-life situations, through the use of
examples of how to and how not to do it. The course provides
methods and templates developed at HSL to help engineers comply
with the relevant requirements effectively and efficiently. 
The course concentrates mainly on the approach laid down in EN ISO
13849-1:2008, but also gives objective advice on the relevance of
other standards such as EN ISO 13840-2: 2012, EN 62061:2015, and
other Safety of Machinery standards, such as EN ISO 14119: 2013 on
interlocking devices.

Course includes

  • Relevant standards including EN ISO 13849-1:2006 2015,
    and EN 62061:2015, EN ISO 14119: 2013
  • Safety integrity levels, performance levels, categories, what
    they are what they aren’t and the difference between them
  • Circuit design
  • Demonstration of interlocking and other safety devices
  • Potential user interference and misuse of safety devices

Who should attend?

Electrical, control and project engineers, whether they be original
equipment manufacturers or users involved in specifying control
systems on customized machinery / assemblies or significantly
modifying control systems on existing machinery / assemblies.

Venue

The course will be run at the HSL laboratory in the spa town of
Buxton. Buxton is in the heart of the Peak District and has good
links to mainline train stations and Manchester International
Airport.

Details of hotels in the Buxton area can be found at www.visitbuxton.co.uk

Cost

The cost of the course is £425 per person (includes course
notes, lunch and refreshments).

Book Course

Please note the invoice option is not available within 4
weeks of the course date, or for overseas customers.


For further dates and additional information email: training@hsl.gsi.gov.uk
or contact the Training Conferences Unit
at HSL directly on +44 (0)1298 218806.


Back to Health Safety Training Courses

Back to the top

Article source: http://www.hsl.gov.uk/health-and-safety-training-courses/machinery-series---designing--specifying-safety-related-control-systems